Gehl 418T Wheel, Руководство оператора

Страница: 117 / 192

5–4
AP0902
Maintenance
5.2.4 Changing the fuel filter
WARNING!
If the fuel, as it drains, comes into contact with hot engine parts or the exhaust
system, there is an increased risk of fire.
☞
Never change the fuel filter if the engine is hot!
Environment!
Use a suitable container to collect the fuel as it drains and dispose of it in an environmen-
tally friendly manner!
☞
Change fuel filter 132/C as follows:
• Thoroughly clean the outside surfaces of the fuel filter
• Firmly hold lower cover 133/6 of the filter and unscrew screw 133/1 on the filter head
• Pull lower cover 133/6 of the filter downward
• Remove and dispose of filter 133/4
• Clean the inside of the filter head and the lower cover
• Replace seals 133/2 and 133/5 and O-ring 133/3 and apply a thin coat of clean fuel
• Hold the lower cover under the new filter and place the filter on the filter head. Ensure
correct position of the filter on the O-ring in the filter head
• Place and tighten screw 133/1
• Bleed the fuel system – see section 5.2.6 Bleeding the fuel system on page 5-6
• Make a test run – and check for tightness!
Fig. 132: Fuel filter position
A
Fig. 133: Removing the fuel filter