Gehl 418T Wheel, Руководство оператора

Страница: 101 / 192

3–64
AP0902
Operation
Loading heaped material (non-compacted material)
WARNING!
Digging under heaped material can cause it to collapse.
☞
Never undermine heaped material!
☞
Proceed as follows:
• Completely retract the telescopic unit
• Select low drive range
• Set the cutting blade of the bucket parallel to the ground. To do this:
Push lever 21 to the left or right (A and B)
• Lower the telescopic unit horizontal to the ground. To do this:
Push lever 21 forward (C)
• Drive forward
After penetrating the heaped material:
• Smoothly lift the telescopic unit
• Keep the bucket level
When the telescopic unit stops raising:
• Roll back the bucket (118/1)
• Raise the telescopic unit (118/2)
• Reverse away from the heaped material (118/3)
• Lower the telescopic unit to transport position
Loading heaped material (compacted material)
Proceed as follows:
• Completely retract the telescopic unit
• Select low drive range
• Proceed as for non-compacted material, however when raising the telescopic unit
through the heaped material:
• Roll back the bucket in and out slightly (119/1). To do this:
Move lever 21 alternately to the left and right (A and B)
➥
Material is loosened
Fig. 117: Penetrating the heaped material
21
Fig. 118: Reversing away from heaped material
1
3
2
21
Fig. 119: Heaped compacted material
1
21