Gehl 418T Wheel, Руководство оператора

Страница: 54 / 192

AP0902
3–17
Operation
Starting at temperatures below
32 °F (0 °C)
☞
Starting at temperatures below 32 °F (0 °C):
• Turn the ignition key to position 2 and hold it in this position for about 15 seconds
• Press the accelerator pedal 16/6 all the way down
• Turn the ignition key to position “3” and hold it in this position until the engine starts
• Release the ignition key
When the engine runs smoothly (increased engine speed):
• Release accelerator pedal 16/6
NOTE:
In general, a battery delivers less energy in cold conditions. As a result, you must
be sure the battery is always well charged.
... for a cold start at outside temperatures below 32 °F (0 °C):
☞
Let the engine run at increased idling speed for about 1 minute
☞
Do not exceed the average engine speed for 10 minutes,
however drive and work hydraulics may be started gently. Do not extend or retract the
hydraulic cylinders to the limits if possible
☞
Increase the diesel engine speed and hydraulic forces gradually
... for a cold start at outside temperatures below 50 °F (10 °C):
☞
Increase the engine speed slowly
☞
Do not run the engine at full load for the first 10 minutes