Gehl 418T Wheel, Руководство оператора

Страница: 57 / 192

3–20
AP0902
Operation
3.4.5 Before driving the machine
Before driving the machine:
• Check the function of:
• Brakes
• Steering and
• Lighting
• Dump out the bucket
• Adjust the bucket to transport position. To do this:
• Retract the telescopic unit completely
• Tilt the front bucket to the rear (36/B) and
• Raise the telescopic unit so that both red marks D on the lift frame and the
bulkhead are aligned
NOTE:
In transport position, two red marks D on the lift frame and on the bulkhead are
aligned (figure 37). These markings are visible from the operator's cab.
With both marks D aligned, transport ground clearance amounts to at least 9 inches
(230 mm) (36/C), with standard bucket and standard tires (12.5-20).
• Secure the control lever for the telescopic unit 21 against unintentional operation. To
do this:
Push control lever 21 down in neutral position
➥
The control lever is locked in this position, it cannot be moved
• Secure the control lever for the 3rd control circuit/attachments 22 against uninten-
tional operation. To do this:
• Turn safety sleeve 23 clockwise until it is pulled down by spring action.
• Let control lever 22 lock into place in central position.
➥
The control lever is locked in this position and cannot be moved. The lock can only
be released by lifting the safety sleeve
C
B
Fig. 36: Driving on public roads
Fig. 37: Marks for transport position
D
Fig. 38: Securing the control lever for the telescopic unit
21
Fig. 39: Securing the control lever for the attachments
22
23