Gehl 418T Wheel, Руководство оператора

Страница: 78 / 192

AP0902
3–41
Operation
Loading and transporting the
machine:
WARNING!
To avoid injury, the machine must be loaded and transported properly:
☞
It is essential that you read the safety instructions at the beginning of this
chapter and follow them!
☞
Load as follows:
• Secure the transport machine with chocks to prevent it from rolling
• Attach the ramps so that the access angle is as small as possible, and ensure that
they cannot slip
• Ensure that the loading area is clear and access to it is not obstructed.
• Ensure that the ramps and the wheels of the wheel loader are free of oil, grease
and ice
• Start the engine of the wheel loader
• Raise the front bucket enough so that it will not touch the ramps
• Carefully drive the wheel loader onto the transport machine
• Move drive lever to neutral – see Driving direction selector switch on page 3-8
• Apply the parking brake of the wheel loader
• Lower the bucket to the loading area with the telescopic unit retracted
• Ensure that the authorized maximum height is not exceeded
• Cut off the engine of the wheel loader
• Secure all tyres of the wheel loader with chocks in front of, behind and at the sides of
each wheel
• Securely lash the wheel loader onto the loading area using straps and chains of
adequate size at the lashing points provided – see section 1.2 Machine: Overview on
page 1-2
• Before transporting the machine through heavy rain:
Close the outlet of the exhaust silencer with a simple cap or suitable adhesive tape
• Make certain that the driver of the transport machine knows the overall height of his
machine before departure!