gefran SIEIDrive ADV100, Описание функций и список параметров, Страница: 47 / 172

ADV100 • Functions description and parameters list
47
0 Local
1 Remote
In Remote mode the “ Commands remote sel ” parameter is used to configure the source of the Enable and Start
commands, which can be Terminal (standard digital input, expansion digital input) or Digital (Modbus, Fieldbus,
Profile DS402, Profile profidrive).
In
Local
mode the “
Commands local sel
” parameter is used to configure the source of the Enable and Start com-
mands, which can be Terminal (standard digital input, expansion digital input) or Keypad (Start key, Stop key).
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
11.9 1016 Terminal Start src LINK 16 1048 0 16384 ERW FVS
Selection of the origin (source) of the Terminal Start signal. Switching can only be performed if the hardware is not
enabled on the Enable terminal.
The signal to be associated with this function can be selected from the “ L_DIGSEL3 ” selection list.
In the default condition, the origin of the Terminal Start signal is the Start output of the ForwardReverseControl
(FRC) block.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
11.10 1018 Digital Enable src LINK 16 6000 0 16384 ERW FVS
Selection of the origin (source) of the signal that defines the enabling of the drive when the commands are sent via
serial line or fieldbus. The command to be associated with this function can be selected from the “ L_DIGSEL2 ”
selection list.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
11.11 1020 Digital Start src LINK 16 6000 0 16384 ERW FVS
Selection of the origin (source) of the Digital Start signal. The signal to be associated with this function can be se-
lected from the “ L_DIGSEL2 ” selection list.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
11.12 1022 FastStop src LINK 16 6000 0 16384 ERW FVS
Selection of the origin (source) for the fast stop signal (FastStop). The terminal to be associated with this function
can be selected from the “ L_DIGSEL2 ” selection list. During the execution of the FastStop command the ramps
used are Acceleration time 3 and Deceleration time 3 .
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
11.13 1024 Enable cmd mon BIT 16 0 0 1 R FVS
The status of the enable command is displayed.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
11.14 1026 Start cmd mon BIT 16 0 0 1 R FVS
The status of the Start command is displayed.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
11.15 1028 FastStop cmd mon BIT 16 0 0 1 R FVS
The status of the FastStop command is displayed.
Menu PAR Description UM Type FB BIT Def Min Max Acc Mod
11.16 1040 FR mode ENUM Normal 0 2 ERWZ FVS
Setting of the operating mode of the Forward Reverse Control (FRC) block.
0 Normal
1 Two wire Two wire control