GEDA
®
3700 Z/ZP
Assembly
ML034 GB 2017 / 11
Page 35 of 60
Assembly Instructions
Operation without electric module
(
Attention!
Observe national regulations)
The dummy plug remains in the red plug connector of the switch box of the
ground station, thus, operation of the machine is only possible from the
ground control.
Switching on the transport platform
After the preparation, set the main
switch (1) to Position “
I”
(ON).
The green control light must illuminate.
If the control light does not illuminate, refer to the Malfunctions
Chapter in the instruction manual.
1
