GEDA 3700 Z, Руководство по сборке

Страница: 50 / 60

Assembly GEDA
®
3700 Z/ZP
Assembly Instructions Page 50 of 60 ML034 GB 2017 / 11
6.9.2 Installing the central feeder and travelling cable
CAUTION
Damage to the cable and cable carriage
During assembly, make sure that there is sufficient length of cable.
The cable must be installed so that the side with the cable identification is
located on the outside of the cable pulley / cable carriage.
Extending the trailing cable
For the final assembly height, the travelling cable must be extended.

Disconnect the travelling cable from the cable box at the right switch
box of the platform and remove from the cable holder.

Unwind the extension of the travelling cable (1) from the transportation
cable drum.

Connect the coupling of this
extension (1) to the plug
connection (3) below the right
switch box on the platform, route
to the cable holder (2) and install
there.

Connect the plug of the extension (1) to the coupling of the travelling-
cable cable box disconnected.
3