GE Vivid i, Руководство пользователя

Страница: 81 / 388

Basic scanning operations
Vivid i User’s Manual
71
2378958-100 Rev. 02
Configuration of the pre-defined
annotation list
1. Press
CONFIG
.
2. In the Configuration package, select Measure .
3. In the Measure category select Annotation .
The Annotation sheet is displayed where the user can add,
delete or re-arrange the annotation text (see Figure 2-11).
To re-arrange the annotation list
1. Trackball to the actual annotation text.
2. Press
SET
.
3. Press the relevant button (i.e Delete , Move up or Move
down ) to apply change.
4. Press save to store the new annotation list.
To add an annotation text
1. Trackball to the text entry field (see Figure 2-11).
2. Press
SET
to activate the text cursor.
3. Type the new annotation text.
4. Press add .
The new annotation text is added at the end of the list.
5. Press save to store the new annotation list.