GE Multilin GEK-113328A Скачать руководство пользователя страница 71

Страница: 71 / 218

GEK-113328A

G650 Generator Protection & Control System

3-11

3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES 3.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE

3.1.7 FILE MENU OVERVIEW

Table 3–4: GENERAL OVERVIEW OF FILE MENU:

Options enabled only in On-line mode are marked as (*). Options enabled only in Off-line mode are marked as (**)

FILE

New (**)

Create a new settings and configuration file, with the default relay
settings and no configuration

Open (**)

Open a settings and configuration file for off-line working.

Save (**)

Save *.650 settings and configuration file

Save As (**)

Save as *.650 settings and configuration file.

Close (**)

Close the opened *.650 file in EnerVista 650 Setup.

Config File (*.650)
Converter

Tool to convert the *.650 files from one version to another

Properties (**)

File properties for *.650.

Get info from relay (*)

Retrieve the *.650 settings and relay configuration compiled equations
from the relay.

Send info to relay (*)

Send and write the *.650 settings and configuration to the relay.

Print Setup (**)

To configure printer settings.

Print Preview (**)

Preview of settings and configuration file printing format.

Print (**)

Launch the *.650 file to be printed.

Print to file (*.xls) (**)

*.650 printed to file in excel format.

Exit

Quit the application closing all the open windows.

Содержание Multilin GEK-113328A



























































































































































































































Результаты поиска

Содержание Multilin GEK-113328A

Отзывы:

GE Multilin GEK-113328A, Инструкция по эксплуатации, Страница: 71 / 218

Результаты поиска

Содержание Multilin GEK-113328A

Отзывы: