GE Marquette Responder 3000, Руководство оператора

Страница: 62 / 90

Recording
62 Marquette Responder® 3000 227 490 02-C
Figure 12-2. Opening the paper compartment
door
Figure 12-3. Inserting the new roll
1 2 3
Figure 12-4. Closing the paper compartment door
Note
If you store the recordings in plastic folders these
should be made of polyethylene, because the traces
fade in PVC covers (if in doubt, insert a sheet of
paper between recording and folder).
Loading Chart Paper
To prevent damage to the printhead, use the
original HELLIGE CONTRAST paper only
(P/N 226 168 02).
•
Open the paper compartment door all the way
(Figure 12-2).
•
Remove the spindle with the sleeve of the
previous paper roll.
•
Insert the spindle in the new roll and place the
roll into the device as shown in Figure 12-3.
•
Pull a length of paper (approx. 15 cm) from the
compartment and close the door (Figure 12-4).
The paper compartment door must click into
place audibly on both sides.
The last 3 meters of the roll paper are marked.
Insert a new paper roll in time to ensure that all
alarm recordings are documented.
Caution
-
Risk of Skin Burns — When inserting a new
paper roll, be careful not to touch the thermal
printhead. Particularly after long recordings it
may be very hot.
-
Paper Jam — When operating the defibrilla-
tor in the carrying bag, the flap covering the
recorder must be open and secured with the
Velcro fastener against dropping to prevent
that it obstructs the paper exit.