GE LOGIQ S6, Руководство по обслуживанию

Страница: 79 / 318

GE H
EALTHCARE
D
IRECTION
5162630, R
EVISION
3 LOGIQ™ S6 S
ERVICE
M
ANUAL
Section 4-2 - General Procedure 4-7
4-2-4 Using MOD/DVD Drive
4-2-4-1 Using DVD Drive
1.) Push the EJECT button, the disk tray will appear.
2.) Put the disk onto the disk tray.
3.) Press the
EJECT button to insert the disk into the DVD device.
4.) There are a number of methods to eject a disk from the DVD. Ejection is automatic in some cases.
Manual ejection methods, listed in preferred order of use, are:
a.) Press EJECT button on the DVD while system is ON.
b.) Press and hold EJECT button while the system is booting.
c.) Mechanical ejection. Insert the end of a paper clip into the hole while system power is OFF.
NOTE: Be careful not to scratch the disk when wiping it off for cleaning.
NOTE: Keeping your DVD disc in an original DVD case or caddy all the time will prevent it from
becoming dirty or damaged.
NOTICE
Never move the unit with a disk in the DVD because the drive actuator will not be locked and
the DVD could break.
NOTICE
Avoid mechanical ejection whenever possible. Mechanical ejection leaves the actuator
unlocked and the MOD susceptible to damage if moved. If forced to use this method, reboot
the system, then insert and eject a known good disk using one of the other methods.
Figure 4-17 DVD drive
Eject Button
DVD
Drive