GE Druck DPI 620-IS, Руководство пользователя

Страница: 35 / 98

[EN] English - K0460 Prepare the instrument 2-13
Issue 1
2.9 Measure and
source operations
After setting the measure and source functions required on the
display (see
Section 2.8.3 ), these procedures can be set:
•
If necessary, change the Process for the CH1 and/or CH2
measure functions (item ) including:
Tare , Alarm , Filter , Flow , Scaling ; see Section 2.9.1 .
For more optional Settings for the TC , Frequency , and RTD
functions; see Chapter 3 .
•
If necessary, change the Automation options for the CH1
and/or CH2 source functions (item ) including:
Nudge , Span Check , Percent Step , Defined Step , Ramp ;
see Section 2.9.2 .
For more optional Source Settings for the TC , Frequency ,
and RTD functions; see Chapter 3 .
For other Settings for Observed functions; see
Section 2.9.3 .
•
If necessary, change the Settings for the pressure function
(item ):
a. Process ( Tare , Alarm , Filter , Flow , Scaling ); see
Section 2.9.1 .
b. Leak Test (Only when the function is set-up with this
Utility - Section 2.8.6 ); for operation, see Chapter 4 .
c. Zero; see Chapter 4 .
•
If necessary, change the Configuration ( item ) including:
Data Logging ( Chapter 6 ), Documenting ( Chapter 7 ), and
Advanced options ( Section 2.10 ).
•
When all the software selections are complete, make the
applicable connections (electrical and/or pressure).
Examples:
a. Electrical operations ( Chapter 3 ).
b. Pressure operations with the MC 620-IS module carrier
( Chapter 4 ).
c. Pressure operations with a PV 62x-IS pressure station
(refer to the user manual - K0462).
1
A
TAP
A
1
B
TAP
B
1
C
C
D
2
1
D