GE DINAMAP ProCare, Руководство по обслуживанию

Страница: 26 / 134

2-4 DINAMAP
®
ProCare Monitor Service Manual Revision C
2009381-001
Equipment Overview: Basic Components
Basic Components
Front Panel Controls and Indicators
Buttons
1. Silence button: Press to mute audible alarms. Any alarm active that is
acknowledgeable is also removed whenever this key is pressed. When
pressed after alarm sounds (silence active), the silence icon (bell) lights to
indicate that audible alarms have been silenced for 2 minutes.
2. Alarms button: Press to view or adjust parameter alarm settings.
3. +/- button (Plus/Minus): These buttons are active when the following user
modes are active: limit, menu, cycle, and history. When limit or menu mode
is active, pressing the
+ button increases an adjustable setting and the -
button decreases an adjustable setting. When the cycle or history mode is
active, pressing the +/- buttons displays the next or previous cycle selection
or entry in the history list, respectively. When you reach the beginning or
ending of a list, a key-click sounds.
4. Menu button: Press to access menu settings that can be adjusted while in
clinical mode (i.e., ALARM VOLUME, PULSE VOLUME, INFLATE PRESSURE;
refer to Operating Modes in this section for a description of clinical mode).
5. SpO
2
sensor connector: SpO
2
sensor extension cable attaches here.
6. BP connector: BP cuff hose attaches here.
7. Inflate/Stop button: Press to start a manual BP determination or stop any BP
determination.
8. Temperature probe holster: Temperature probe is stored here.
9. Cycle button: Press to start Auto Cycle or STAT mode.