GE DigitalFlow GF868, Руководство по программированию

Страница: 121 / 152

DigitalFlow™ GF868 Programming Manual (2-Channel) 111
Appendix C. Programming with PanaView
C.5.6b Saving a New Site to the Meter
To save a new site to the meter:
1. Select the radio button for New and click on the Save Site to Meter button.
2. A window opens similar to Figure 33. Enter the desired name, and click
[OK]
.
Figure 33: Site Name Entry Window
3. The Site File Selection window (Figure 32 on page 110) opens. Highlight a site with the desired settings, and click
[Open]
.
PanaView saves the site in the meter with the new name and the desired settings.
C.5.6c Saving a Site to the PC
To save a site to the PC:
1. Highlight the desired site in the left pane. (See Figure 31 on page 110.)
2. Click Save Site to PC. A window opens similar to Figure 30 on page 109.
3. Enter the desired site name and click
[Save]
. PanaView saves the site in the PanaView folder unless otherwise
specified.
Note:
If you have created a site on the meter after opening the Site File Operations window, you must close and
reopen the window to click on the new site.
C.5.6d Clearing a Site from the Meter
To clear a site from the meter:
1. Highlight the site in the left pane. (See Figure 31 on page 110.)
2. Click Clear Site From Meter.
3. The program asks for confirmation. Click
[OK]
. The meter deletes the designated file.