GE Multilin F35, Инструкция по эксплуатации

Страница: 462 / 486

E-2 F35 Multiple Feeder Protection System GE Multilin
E.1 DEVICE PROFILE DOCUMENT APPENDIX E
E
Requires Application Layer Confirmation:
Never
Always
4
When reporting Event Data
4
When sending multi-fragment responses
Sometimes
Configurable
Timeouts while waiting for:
Data Link Confirm:
4
None Fixed at ____ Variable Configurable
Complete Appl. Fragment:
4
None Fixed at ____ Variable Configurable
Application Confirm: None
4
Fixed at 10 s Variable Configurable
Complete Appl. Response:
4
None Fixed at ____ Variable Configurable
Others:
Transmission Delay: No intentional delay
Need Time Interval: Configurable (default = 24 hrs.)
Select/Operate Arm Timeout: 10 s
Binary input change scanning period: 8 times per power system cycle
Analog input change scanning period: 500 ms
Counter change scanning period: 500 ms
Frozen counter event scanning period: 500 ms
Unsolicited response notification delay: 100 ms
Unsolicited response retry delay configurable 0 to 60 sec.
Sends/Executes Control Operations:
WRITE Binary Outputs
4
Never Always Sometimes Configurable
SELECT/OPERATE Never
4
Always Sometimes Configurable
DIRECT OPERATE Never
4
Always Sometimes Configurable
DIRECT OPERATE – NO ACK Never
4
Always Sometimes Configurable
Count
>
1
4
Never Always Sometimes Configurable
Pulse On Never Always
4
Sometimes Configurable
Pulse Off Never Always
4
Sometimes Configurable
Latch On Never Always
4
Sometimes Configurable
Latch Off Never Always
4
Sometimes Configurable
Queue
4
Never Always Sometimes Configurable
Clear Queue
4
Never Always Sometimes Configurable
Explanation of ‘Sometimes’: Object 12 points are mapped to UR Virtual Inputs. The persistence of Virtual Inputs is
determined by the
VIRTUAL INPUT X TYPE
settings. Both “Pulse On” and “Latch On” operations perform the same func-
tion in the UR; that is, the appropriate Virtual Input is put into the “On” state. If the Virtual Input is set to “Self-Reset”,
it will reset after one pass of FlexLogic™. The On/Off times and Count value are ignored. “Pulse Off” and “Latch Off”
operations put the appropriate Virtual Input into the “Off” state. “Trip” and “Close” operations both put the appropriate
Virtual Input into the “On” state.
Table E–1: DNP V3.00 DEVICE PROFILE (Sheet 2 of 3)