GE Multilin F35, Инструкция по эксплуатации

Страница: 411 / 486

GE Multilin F35 Multiple Feeder Protection System B-61
APPENDIX B B.4 MEMORY MAPPING
B
F127
ENUMERATION: LATCHED OR SELF-RESETTING
0 = Latched, 1 = Self-Reset
F128
ENUMERATION: CONTACT INPUT THRESHOLD
0 = 17 V DC, 1 = 33 V DC, 2 = 84 V DC, 3 = 166 V DC
F129
ENUMERATION: FLEXLOGIC TIMER TYPE
0 = millisecond, 1 = second, 2 = minute
F130
ENUMERATION: SIMULATION MODE
0 = Off. 1 = Pre-Fault, 2 = Fault, 3 = Post-Fault
F131
ENUMERATION: FORCED CONTACT OUTPUT STATE
0 = Disabled, 1 = Energized, 2 = De-energized, 3 = Freeze
F132
ENUMERATION: DEMAND INTERVAL
0 = 5 min, 1 = 10 min, 2 = 15 min, 3 = 20 min, 4 = 30 min,
5 = 60 min
F133
ENUMERATION: PROGRAM STATE
0 = Not Programmed, 1 = Programmed
F134
ENUMERATION: PASS/FAIL
0 = Fail, 1 = OK, 2 = n/a
F135
ENUMERATION: GAIN CALIBRATION
0 = 0x1, 1 = 1x16
F136
ENUMERATION: NUMBER OF OSCILLOGRAPHY RECORDS
0 = 31 x 8 cycles, 1 = 15 x 16 cycles, 2 = 7 x 32 cycles
3 = 3 x 64 cycles, 4 = 1 x 128 cycles
F137
ENUMERATION: USER-PROGRAMMABLE PUSHBUTTON
FUNCTION
0 = Disabled, 1 = Self-Reset, 2 = Latched
F138
ENUMERATION: OSCILLOGRAPHY FILE TYPE
0 = Data File, 1 = Configuration File, 2 = Header File
F139
ENUMERATION: DEMAND CALCULATIONS
0 = Thermal Exponential, 1 = Block Interval, 2 = Rolling Demand
F140
ENUMERATION: CURRENT, SENS CURRENT, VOLTAGE,
DISABLED
0 = Disabled, 1 = Current 46 A, 2 = Voltage 280 V,
3 = Current 4.6 A, 4 = Current 2 A, 5 = Notched 4.6 A,
6 = Notched 2 A
F141
ENUMERATION: SELF TEST ERRORS
bitmask error
0 Any Self Tests
1 Maintenance Alert
10 FlexLogic Error Token
11 Equipment Mismatch
13 Unit Not Programmed
14 System Exception
15 Maintenance Alert
16 Ethernet Switch Failure
17 Maintenance Alert
18 Maintenance Alert
19 Maintenance Alert
20 Maintenance Alert
21 Maintenance Alert
27 Remote Device Off
28 Direct Device Off
29 Maintenance Alert
30 Any Minor Error
31 Any Major Error
32 DSP Error
33 No DSP Interrupts
34 Unit Not Calibrated
35 EEPROM Data Error
36 SRAM Data Error
37 Program Memory
38 Watchdog Error
39 Low On Memory
40 Prototype Firmware
41 Module Failure 01
42 Module Failure 02
43 Module Failure 03
44 Module Failure 04
45 Module Failure 05
46 Module Failure 06