manualshive.com logo in svg

GE Multilin F35, Инструкция по эксплуатации

Barco F35 - профессиональный проектор высокой четкости. Чтобы начать пользоваться им сразу, скачайте бесплатное руководство по быстрому запуску и руководство пользователя с нашего сайта. Научитесь получать максимум от вашего устройства. Скачать с manualshive.com.

Поделиться
Скачать
background image

5-22

F35 Multiple Feeder Protection System

GE Multilin

5.2 PRODUCT SETUP

5 SETTINGS

5

These settings are applicable to fixed (DNA/UserSt) GOOSE only.

The 

GOOSE ID

 setting represents the IEC 61850 GOOSE application ID (GoID) name string sent as part of each GOOSE

message. This string identifies the GOOSE message to the receiving device. In revisions previous to 5.0x, this name string
was represented by the 

RELAY NAME

 setting.

The 

DESTINATION MAC

 setting allows the destination Ethernet MAC address to be set. This address must be a multicast

address; the least significant bit of the first byte must be set. In F35 releases previous to 5.0x, the destination Ethernet MAC
address was determined automatically by taking the sending MAC address (that is, the unique, local MAC address of the
F35) and setting the multicast bit.

The 

GOOSE VLAN PRIORITY

 setting indicates the Ethernet priority of GOOSE messages. This allows GOOSE messages to

have higher priority than other Ethernet data. The 

GOOSE ETYPE APPID

 setting allows the selection of a specific application

ID for each GOOSE sending device. This value can be left at its default if the feature is not required. Both the 

GOOSE VLAN

PRIORITY

 and 

GOOSE ETYPE APPID

 settings are required by IEC 61850.

The configurable GOOSE settings are shown below.

PATH: SETTINGS... 

ÖØ

 COMMUNICATIONS 

ÖØ

 IEC 61850... 

Ö

 GSSE... 

Ö

 TRANSMISSION 

ÖØ

 CONFIGURABLE GOOSE 1(8)

The configurable GOOSE settings allow the F35 to be configured to transmit a number of different datasets within IEC
61850 GOOSE messages. Up to eight different configurable datasets can be configured and transmitted. This is useful for
intercommunication between F35 IEDs and devices from other manufacturers that support IEC 61850.

The configurable GOOSE feature allows for the configuration of the datasets to be transmitted or received from the F35.
The F35 supports the configuration of eight (8) transmission and reception datasets, allowing for the optimization of data
transfer between devices.

Items programmed for dataset 1 will have changes in their status transmitted as soon as the change is detected. Dataset 1
should be used for high-speed transmission of data that is required for applications such as transfer tripping, blocking, and
breaker fail initiate. At least one digital status value needs to be configured in dataset 1 to enable transmission of all data
configured for dataset 1. Configuring analog data only to dataset 1 will not activate transmission.

Items programmed for datasets 2 through 8 will have changes in their status transmitted at a maximum rate of every
100 ms. Datasets 2 through 8 will regularly analyze each data item configured within them every 100 ms to identify if any
changes have been made. If any changes in the data items are detected, these changes will be transmitted through a
GOOSE message. If there are no changes detected during this 100 ms period, no GOOSE message will be sent.

For all datasets 1 through 8, the integrity GOOSE message will still continue to be sent at the pre-configured rate even if no
changes in the data items are detected.

The GOOSE functionality was enhanced to prevent the relay from flooding a communications network with GOOSE mes-
sages due to an oscillation being created that is triggering a message.

„

 CONFIGURABLE

„

 GOOSE 1

CONFIG GSE 1

FUNCTION: Enabled

Range: Enabled, Disabled

MESSAGE

CONFIG GSE 1 ID:

GOOSEOut_1

Range: 65-character ASCII string

MESSAGE

CONFIG GSE 1 DST MAC:

010CDC010000

Range: standard MAC address

MESSAGE

CONFIG GSE 1

VLAN PRIORITY: 4

Range: 0 to 7 in steps of 1

MESSAGE

CONFIG GSE 1

VLAN ID:

0

Range: 0 to 4095 in steps of 1

MESSAGE

CONFIG GSE 1

ETYPE APPID:

0

Range: 0 to 16383 in steps of 1

MESSAGE

CONFIG GSE 1

CONFREV:

1

Range: 0 to 4294967295 in steps of 1

MESSAGE

„

 CONFIG GSE 1

„

 DATASET ITEMS

Range: 64 data items; each can be set to all valid MMS

data item references for transmitted data

Содержание F35







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для F35

Solera FV211016-63 Quick Start Manual preview
FV211016-63
Бренд: Solera Страницы: 4
Protekt AZ 640 Series Instruction Manual preview
AZ 640 Series
Бренд: Protekt Страницы: 2
K40 RL200di Owner'S Manual preview
RL200di
Бренд: K40 Страницы: 20
MAGNA LENS Eye/Ear Safety System Quick Start Manual preview
Eye/Ear Safety System
Бренд: MAGNA LENS Страницы: 4
Quasar SR-5144 Operating Instructions Manual preview
SR-5144
Бренд: Quasar Страницы: 58
Kask ZEN Series Use And Care Booklet preview
ZEN Series
Бренд: Kask Страницы: 64
GE Multilin MM200 Quick Start Manual preview
MM200
Бренд: GE Multilin Страницы: 34
GE Multilin MIGII Instruction Manual preview
Multilin MIGII
Бренд: GE Страницы: 242
GE G60 UR Series Instruction Manual preview
G60 UR Series
Бренд: GE Страницы: 634
GE Multilin W650 Instruction Manual preview
Multilin W650
Бренд: GE Страницы: 622
GE ML Series 350 Communications Manual preview
ML Series 350
Бренд: GE Страницы: 302
GE N60 UR Series Instruction Manual preview
N60 UR Series
Бренд: GE Страницы: 500
GE M60 UR Series Instruction Manual preview
M60 UR Series
Бренд: GE Страницы: 662
GE Multilin 850 Instruction Manual preview
Multilin 850
Бренд: GE Страницы: 664
Toshiba GRD140 Instruction Manual preview
GRD140
Бренд: Toshiba Страницы: 20
LG RU-44SZ80L - - 44" Rear Projection TV Service Manual preview
RU-44SZ80L - - 44" Rear Projection TV
Бренд: LG Страницы: 43
Reer 32030 User Manual preview
32030
Бренд: Reer Страницы: 2
Maurer EAR-MUFFS 80923 User Manual preview
EAR-MUFFS 80923
Бренд: Maurer Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды