Page 4 - 7
Installation
Orca III/ Orca III T Operation and Maintenance Manual
© GBC Films Group February 2001
Figure 4.5.1 Disassembling of the crate
O
R C
A III
G B
C
Pr
o
- T
e c
h
R e
m
o v
e T
h is
S
ide
5
4
3
1
2
4.5.2 The shrink wrap
a) Gently unwrap the shrink wrap from around the
laminator.
CAUTION
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
b) Move all packing materials to a safe distance.
4.5.3 Moving the laminator
a) Have the laminator removed off of the skid one of
two methods:
1) Rolled off the skid and placed on the floor by
licensed riggers using the included ramps. The
ramps must be secured utilizing screws
removed from the disassembled crate.
W A R N I N G
Do not attempt to use the ramps if they are
not secured to the pallet. Ensure the pallet is
on a flat even surface before attempting to
roll the machine off.
2) Lifted off of the skid with a forklift by positioning
the forks where indicated by fork lift decals
located on the tie bars on the machine.
