Operations
Page 5 - 12
Orca III/ Orca III T Operation and Maintenance Manual
© GBC Films Group February 2001
5.6 Film loading/ unloading
The Orca III/ Orca III T utilizes a swing out
unwind arm for simple loading and unloading of film.
Always pay particular attention to which side of the
laminate is the adhesive side and which side is the
laminate side. The adhesive side should always face
away from the face of the rollers.
T h e rm a l P o ly - o u t
T h e rm a l P o ly - in
P S A P o ly - o u t
P S A P o ly - in
M ou n t
a d he s iv e
o nly
Load a roll of film
a) Adjust the core chucks to fit within the roll of
film being used. The roll of film should be
approximately center of the main rollers. The
core chucks should be close to the edge of the
roll of film.
R o ll o f film
C o re c h u c k
C o re c h u c k
C o re s u p p o rt
b) Pull up on the clevis pin to the unwind support
saddle you are about to load a roll of film to.
C le v is p in
U n w in d su p p o rt s a d d le
c) Swing the unwind arm out away from the
machine.
( U p p e r u n w in d s h a ft s h o w n fo r illu s tra tio n p u rp o s e s )
