78
3. After cleaning rinse all parts with clear water and dry them carefully. You can
also leave all parts dry naturally where they are out of reach of young children.
When the parts are dry assemble the blender jug for storage or usage.
CLEANING THE MOTOR BLOCK
WARNING:
Do not place the motor block in an automatic dishwasher or
pour boiling water over it. Do not immerse the motor or power cord in any liquids
or spill any liquids on it or place the motor on wet surfaces. Always wipe off spil-
led liquids immediately. Ensure that no water can run into the louvre. When liquids
are spilled on the motor housing, immediately unplug the appliance and dry the
motor housing to avoid risk of electric shock or fire. Do not attempt to operate the
appliance, when liquids are on or in the motor housing.
1. Always turn the appliance off, wait for the motor to stop completely, and unplug
the appliance from the power outlet before you start cleaning the motorblock.
2. Wipe the motor housing and power cord with a damp soft cloth. Take care not
to spill or drip water or any other liquids on the motor housing.
ATTENTION:
Ensure not to damage the drive gear. Never poke with anything
into the motorblock. If necessary use a soft brush for cleaning. If any liquids run
into the motorblock clean and dry the motorblock very carefully.
3. Thoroughly dry the motor block after each cleaning or leave it dry naturally
where it is out of reach of young children. Afterwards assemble the appliance.
Attendance:
You do not need to oil the motor. Clean the parts only as described
in the instructions.
WARNING:
Return the entire appliance to an authorised service centre for
examination and repair.
