72
two indicator lamps go out). The blender automatically starts the program with dif-
ferent speeds and multiple breaks. The program automatically ends after about 68
seconds. Press the Stop button to terminate the program prematurely at any time.
When the program is finished, the three indicator lights flash again.
»Smoothie« program
Press the ›Smoothie‹ button, the corresponding indicator lamp is light on (the other
two indicator lamps go out). The blender starts an automatic program with different
speeds to mix smoothies. The program ends after about 60 seconds automatically.
Press the Stop button to terminate the program prematurely at any time. When the
program is finished, the three indicator lights flash again.
Note
The Smoothie function has a unique processing technique. Heavy and solid foods
are first processed with a slow speed. Once the food is thick, the speed incre-
ases automatically. This can happen more often for the preparation of smoothies.
»Interval« program
Press the ›Interval‹ button, the corresponding indicator lamp is light on (the other
two indicator lamps go out). The blender starts an automatic program with different
speeds. The program ends after about 43 seconds automatically. Press the Stop but-
ton to terminate the program prematurely at any time. When the program is finished,
the three indicator lights flash again.
3. When the foods have the desired consistency, switch to Stop mode (press Start-/
Stop-button) and turn the rotary switch to position ›0‹ (switch position: OFF) - the
appliance is turned off when all lights are off - wait until the motor has come to
a complete stop and pull out the power plug from the outlet. Take the jug from
the motor block by lifting it up from the motor block.
4. Then remove the lid off the blender jug. Liquid products - from drink to viscous
dough - you can pour from the blender jug.
Important:
Do not leave any food residue to dry on the parts of the appliance.
Clean the equipment immediately after each use according to the instructions
›Care and Cleaning‹.
WARNING:
A safety switch prevents operation of the engine without glass
container. Therefore, the blender can be switched on only when the glass contai-
ner is correctly mounted on the motor block.