67
into drip tray.
d) Repeat with right screw. Steam will be
released from the boiler.
CAUTION HOT STEAM!
e) Close valves when water stops flowing
through both outlets. Empty drip tray and
re-assemble onto unit.
CAUTION HOT WATER!
Step 5 – Fill Boilers
Press 1 cup button and the 20 minute timer
will begin. Countdown timer is finished when
PLCD leaves BLANK. (This allows any remai-
ning solution to be removed from system).
Step 6 – Flush Boilers
a) Empty water tank, rinse and assemble
new water filter into tank.
b) Fill water tank with clean water and
replace into machine.
c) Rotate screws counter-clockwise, as per
previous instructions until fully open.
Water will begin to flow into drip tray.
d) Close valves when water stops flowing
through both outlets. Empty drip tray and
re-assemble onto unit.
CAUTION HOT WATER!
e) Press 1 cup button to complete the de-
scale procedure. Machine will heat up as
normal.
Temperature Unit - °C/ºF (SEt)
Temperature Unit will be displayed on the
LCD screen as SEt. Press MENU to Select.
Use UP and DOWN arrows to select desired
temperature unit. Press MENU to set. Machi-
ne will beep once to confirm selection. Press
EXIT to return to STANDBY mode.
Steam Temperature (StEA)
Adjust Steam Temperature to control the pres-
sure of the steam being delivered. Lower
steam temperature to texture smaller volumes
of milk or have more control. Raise steam
temperature to texture larger volumes of milk.
Press MENU to Select STEAM.
Use UP and DOWN arrows to select required
steam temperature.
Press MENU to set.
Machine will beep once to confirm selection.
