73
HINTS & TIPS:
• Always use freshly ground coffee for a
superior flavour and body.
• Use freshly roasted coffee beans, with
a ‘roasted on’ date and use within 2
weeks of ‘roasted on’ date.
• Store coffee beans in a cool, dark and
dry container. Vacuum seal if possible.
• Buy coffee beans in small batches to
reduce the storage time and store no
more than one weeks supply at any
time.
• Grind beans immediately before brew-
ing as ground coffee quickly loses its
flavour and aroma.
CARE & CLEANING
CLEANING CYCLE
• CLEAN ME! will be displayed on LCD
to indicate when a cleaning cycle is
required (approx. 200 shots).
• Insert the supplied cleaning disc, follo-
wed by 1 cleaning tablet into the 1 CUP
filter basket. Please use Gastroback clea-
ning tablets (Art.-No.: 97830).
• Insert the portafilter and lock into group
head.
• Ensure the water tank is filled with cold
tap water.
•
Place the jug or a 500ml container
beneath the group head.
• Press MENU button until CLEAN CYCLE
icon flashes and PUSH is displayed on
the LCD screen.
• To start the Clean Cycle press the illumi-
nated MANUAL button.
• The CLEAN CYCLE icon will flash and the
machine will start to countdown from 370
seconds.
• When the cleaning cycle has finished,
remove the filter holder and ensure the
tablet has completely dissolved. If the
tablet has not dissolved, repeat the steps
above, without inserting a new tablet.
• Rinse the filter basket and portafilter tho-
roughly before use.
INSTALLING WATER FILTERS
• Soak filter in a glass of water for 5
minutes.
• Rinse the filter and mesh under running
water.
• Assemble filter into filter holder.
• Set replacement date forward 2 months.
• Install filter holder into water tank.
• Insert water tank into the machine. Ensure
the latch is locked into position.
Please use only Gastroback water filters (Art.-
No.: 97765)
CLEANING THE STEAM WAND
• Wipe the steam wand with a damp cloth
& purge directly after texturing the milk.
• If the any of the holes in the tip of the
steam wand become blocked, ensure the
STEAM LEVER is in the CLOSED position
and clean using the pin on the end of the
cleaning tool.
• If steam wand remains blocked, remove
the tip using the integrated spanner in
the cleaning tool and soak in hot water.
Screw tip back onto the steam wand
using the integrated spanner in the clea-
ning tool.
