GAS GAS WILD HP 450, Руководство по обслуживанию

Страница: 49 / 63

.
Use a funnel to drain the
contents of the oil
reservoir.
3. Remove the three
screws next to the filter
cover (C).
4. Turn and remove the filter
(D) and replace it by another
new one.
5. Before replacing the oil filter, make sure that the spring (E) and
the o-ring (F) are in the correct position.
WARNING
Using a filter with an incorrect design may cause engine malfunction.
Use the oil filter with the genuine GAS GAS design or equivalent for
your motorcycle.
WARNING
A mistake in the placement of the new element may cause engine
malfunction.
The motor oil will not flow if the new element is placed incorrectly.
NOTE
Put a new «o-ring» at the same time the filter is replaced.
9. Replace the filter cover and put the screws that secure the cover,
but without tightening them too hard.
WILD HP -
114
-
(E)
(D)
(F)
(D)
CAUTION
Replace the copper gasket every oil changed.
NOTE
Recycle and dispose of used motor oil in an appropriate
container.