GAS GAS WILD HP 450 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 63

GAS GAS WILD HP 450 Скачать руководство пользователя страница 10

IDENTIFICATION NUMBERS

Write down your vehicle's identification number (serial number), the
information in the model label and the key identification number in
the gaps, to make paperwork easier should any spares be required
or as a reference in case of robbery of the vehicle.

Serial numbers

It is located at the front

(A)

. It indicates the frame number the vehicle

is registered with.

WILD HP -

75

-

SERIAL NUM.

IMPORTANT INFORMATION

The vehicle leaves the factory with some unassembled elements,
to make transportation easier. The dealer will make sure each
element is correctly fitted and you will receive the quad ready to
use. This paragraph is purely for your information.

You will find enclosed a carburettor-adjustment kit. The adjustments
must be performed by an expert and only when it is necessary. The
carburettor is already tuned, so changes to its settings are initially
not required.

A spanner for chain tensioning is also enclosed to adjust the chain
tension and centre the swing arm axle. Do not lose it; you will make
good use of it.

1
2

3

5. Chain and swing arm axle adjustment
spanner.

5

4

4

1. Chain guard.
2. Swing arm guard.

3. Footrests.
4. Foot protectors.

«
...
8
9
10
11
12
...
»

Содержание WILD HP 450
































































Отзывы:

Нет отзывов