9-10
Press ENT to activate the route. The
Active Route Page is displayed. This
page displays the “active from” and
“active to” waypoints on line one, as
well as distance and time information
to each waypoint on the following lines.
The time information is blank since
you are not moving yet.
Before you take off, you may want to
view communications frequencies and
runway layout for St. Petersburg - Clearwater International.
To view airport information...
Press WPT and the WPT softkey, if
needed, to select the Waypoint
Definition Page.
Press the right arrow key to place the
cursor on the waypoint category field.
Press CLR to select “APT”, for airport.
Press the right arrow key to highlight
the waypoint identifier field.
Enter the identifier for St. Petersburg -
Clearwater International Airport
(KPIE). Begin by pressing the “4” key
to select the letter “K”.
WPT
CLR
JKL
4
*Plus WPT softkey, if
needed
*Continue pressing the
alphanumeric and
arrow keys, if needed,
to enter waypoint
identifier
ENT