190-01717-B1
G500/G600 TXi Part 23 AML STC Maintenance Manual
Rev. 1
Page 2-4
2.1.6
Save/Load SD
The aircraft configuration settings can be saved to an SD card as well as loaded from an SD card using the
following procedures.
To save your aircraft configuration settings to an SD card:
1. Insert an SD card into the Top/Left slot of any GDU 1060/700 in the system
2. Power on all GDUs in the G500/G600 TXi system in configuration mode
3. From the Home screen, select
SD save
4. Enter the name you would like the configuration saved as
5. Select
Enter
To load your aircraft configuration settings from an SD card:
NOTE
Loading the system configuration from an SD card will overwrite the current system
configuration and is not reversible. It is recommended to always save your current
configuration to the SD card first before loading a new configuration.
1. Insert an SD card into the Top/Left slot of any GDU 1060/700 in the system
2. Power on all GDUs in the G500/G600 TXi system in configuration mode
3. Ensure you have set the GDU ID’s, SYS ID Source, and feature enablements before continuing
4. From the Home screen, select
SD load
5. Select the
Aircraft Configuration File
you want to load
6. Select the
To GDU
to which you want to load configuration settings
NOTE
Information not contained in the selected Aircraft Configuration File will be grayed out
and cannot be selected.
7. Select the check box next to the configuration to be loaded
8. Select
SD Load
9. Verify the loaded configuration(s) are identical to those recorded in the aircraft’s permanent
records.
10. Perform Configuration Ground Check in Section 5.15.1. If any interfaces have a yellow triangle
present on the system summary after loading a configuration from the SD card, verify the interface
settings match the configuration settings stored with the permanent aircraft records. If the settings
do not match, the configuration must be corrected by a Garmin dealer.
