![background image](http://html1.mh-extra.com/html/garland/m-mst35/m-mst35_installation-operation-and-maintenance-manual_3650534012.webp)
Part # 1382677 - 2/15
Page 12
For maximum frying compound life, good operators fi nd
they do best by frying at the lowest temperature that will
give a high-quality product. Thus, with a super-fast fryer,
such as your GARLAND, you do not have to fry potatoes at
375°F or 400°F, your fry at 325°F. A little experimenting will
determine just the right temperatures for your menu items.
The worst enemies of frying compound are light, heat,
air and salt. Thus, its life can materially be lengthened by
keeping the fryer covered when not in use, frying at the
lowest temperatures, and by reducing the temperatures
during stand-by periods.
A common habit which is harmful to frying compounds is
that of salting foods in baskets over frypot. Also, if food is
fried ahead and stored over the frypot to keep hot, as is often
done, it will rapidly lose its crispness and will taste greasy.
A common error in frying is to overload the baskets
under the mistaken impression that this will increase the
production of the fryer. For any given fryer, and any given
food product being fried there is a certain load which will
produce the maximum amount of food per hour. For best
results, we recommend the baskets be fi lled between ½ and
2⁄3 full. If the baskets are loaded beyond this, the total hourly
production rate will decrease.
To give you a staring point, the following chart suggests the
temperatures at which most operators fry certain foods:
FRYING CHART
PRODUCT
TEMPERATURE
TIME
(
0
F)
(
0
C)
French Fried Potatoes
Raw-to-done
350
177
5-7
Min
Blanching
325
163
4
Min
Browning
350
177
2 Min
French Fried Onion Rings
360
182
2-3 Min
Seafood
Shrimp
360
182
2-3
Min
Oysters
350
177
1-4
Min
Scallops
250
121
3-5
Min
Fillets
350
177
3-4
Min
Clams
350-360
177-182
1-3
Min
Chicken
Small Pieces
350
177
6-10 Min
Large Pieces
350-360
177-182
8-11 Min
Cutlets, Chops (1” thick)
325
163
5-7 Min
OPERATION Continued
FRYING CHART
PRODUCT
TEMPERATURE
TIME
(
0
F)
(
0
C)
Fritters
Fruit
350
177
3-5
Min
Vegetables
(asparagus,
caulifl ower, corn,
eggplant,
tomato)
350
177
5-8 Min
Suggestions for Quality Fried Food
•
Fresh, uncontaminated frying compound product better
fried products.
•
Taste the frying compound once a day. Your patrons do,
when they eat the product.
•
Filter the frying compound daily. Merely straining the
shortening is inadequate. You may choose the GARLAND
Filter Quick fi ltering system. This system is designed to
match-up to your GARLAND Fryer. Or, you may choose to
use a fi lter and fi lter cone.
•
Drain or dry foods before frying. Excess moisture and
water breaks down frying compound.
•
Do not salt or otherwise season food over the fryer.
This practice contaminates the frying compound and
accelerates it deterioration.
•
Do not shake breaded items over the fryer.
•
Keep the frypot covered when not in use. This will
prevent air from oxidizing the frying compound and will
keep impurities out.
•
Do not overheat the frying compound. Follow the
temperature recommended in tested recipes. The
company which provides your frying compound can
provide tested recipes and techniques for use with their
shorting.
•
Watch for signs of compound breakdown. An unusual
darkening of the compound or smoking are the fi rst signs
of breakdown. Foaming, objectionable change in fl avour
of the product and gumming also indicate a breakdown
of the frying compound.
•
Set the thermostat at 200°F or below, when not frying.
•
Darkened frying compound and incorrect batter or
breading can cause a fried product to appear to be done.
Use tested recipe or obtain batter or breading specially
prepared for today’s frying techniques.
Содержание M/MST35
Страница 17: ...Part 1382677 2 15 Page 17...