5. Operation
19
5. Operation
5.1 First commissioning
Note
This section describes the behaviour of the control
when it is booted up for the first time after delivery.
After the first commissioning, this behaviour can be
initialized every time by entering a code (see section
5.9 "Codes”).
Note
Do not touch the display when switching on the power
supply, otherwise the GD Connect 12 will not start up
correctly.
After booting up, the language selection screen appears
(see Fig. 4).
Fig. 4 – Language selection
You can select the language by touching the
appropriate flag symbol.
After that you can decide whether to use the wizard to
help with commissioning. The wizard automatically
prompts you to set the necessary parameters.
Before starting this wizard, the GD Connect 12 can
show you the list of parameter settings required:
Once commissioning has been completed, the main
screen comes up and the GD Connect 12 switches off,
i.e. it shows the status of the compressors but does not
control them.
This is also indicated by the message "GD CONNECT
12 IS SWITCHED OFF"
To switch on the GD Connect 12, open the menu
"Adjustments GD Connect 12" menu. In the
"Regulation" sub-menu you can switch on the control.
(See also section 5.7 "Settings").
Note
In order to operate correctly, the appropriate minimum
software version must be installed on the GD Pilot and
GD Pilot MK. The minimum software versions are listed
in the overview in section 4.2.