Gardenline GLPC 41 Скачать руководство пользователя

Страница: 1 / 72

AFTER SALES SUPPORT

0151 649 1500

1890 946244

www.einhell.co.uk

41cc Petrol Chainsaw – GLPC 41

General information

Congratulations!

You have made an excellent choice with the purchase of this quality

Gardenline® product.

By doing so you now have the assurance and peace of mind which

comes from purchasing a product that has been manufactured to

the highest standards of performance and safety, supported by the

high quality standards of ALDI.

We want you to be completely satisfied with your purchase so this

Gardenline® product is backed by a comprehensive manufacturer’s

3 year warranty and an outstanding after sales service through our

dedicated Helpline.

We hope you will enjoy using your purchase for many years to come.

If you require technical support or in the unlikely event that your

purchase is faulty please telephone our Helpline for immediate

assistance. Faulty product claims made within the 3 year warranty

period will be repaired or replaced free of charge provided that you

have satisfactory proof of purchase (keep your till receipt safe!).

This does not affect your statutory rights. However, be aware that

the warranty will become null and void if the product is found to

have been deliberately damaged, misused or disassembled.

The Declaration of Conformity for the Gardenline GLPC 41 Petrol Chainsaw is printed

on page 71 of this User Manual.

Declaration of conformity (see chapter 'Declaration of conformity').

Products marked with this symbol meet all applicable Community

regulations for the European Economic Area.

Содержание GLPC 41









































































Результаты поиска

Содержание GLPC 41

Отзывы:

Похожие инструкции для GLPC 41

Бренды по названию

Популярные бренды

Gardenline GLPC 41, Общее руководство пользователя

Результаты поиска

Содержание GLPC 41

Отзывы:

Похожие инструкции для GLPC 41

Бренды по названию

Популярные бренды