MG6000 Series Media Gateway User
’
s Manual
- 34 -
Figure 4-8 the page of SIP Parameter configuration
All kinds of users could enter this page; all the users have the authorization to configure except common
users.
After modifying the parameter of
Media stream
，
current configuration must be saved, and then reboot the
IAD.
l
SIP Server
a)
Register Server:
User could set less or even no routes by using a register Server. IAD updates
register information on the SIP server periodically, and register interval is the period between one
register message and the next one. User can set register IP or domain name or both of them and IAD
will find the proxy by IP address first.
b)
Backup Server:
Optional configuration. User can set register IP or domain name or both of them like
register server. Once the register server failed to work, backup server will take over it to ensure the
calls going on normally.
c)
Proxy Server:
Optional configuration. It works just like a gateway. If the Proxy Server is started, all
the signaling packages will be sent to it first. Like register server, the priority of IP is higher than
domain name. IP will be processed first.
Attention
：
a). The priority of register server is higher than backup server. All the calls will be set up by the register
server if it works well.
b). If User registers IAD by domain name, the DNS must be configured.
l
Advanced Config
a)
Inviter Linger Time:
Value rage is 100ms to 65535ms and to 32000ms by default.
b)
Provision Time:
Value rage is 100ms to 3600000ms and to 180000ms by default.
