MG6000 Series Media Gateway User
’
s Manual
- 69 -
avoid the mistake of losing IAD because of the long Register interval. The default value is DISABLED
c). According to demand platform, set the advanced parameters of SIP
d). The sip advanced parameters which had be modified will take effect after saving and reseting.
5.1.7.3
Forking parameters
a). Configuration
IAD(8)#
set forking
->Is forking INVITE supported? 'yes' or 'no'[no]:yes
->Is forking preference supported? 'yes' or 'no'[no]:yes
Forking Preference:
0 --- disabled
1 --- no-fork
2 --- fork
3 --- parallel
4 --- sequential
->Select forking preference[0,disabled]:0
->1xx timeout(100-3600000 ms)[180000]:180000
->ACK timeout(100-65535 ms)[32000]:32000
***This Configuration work after reset!***
Really want to modify?'yes' or 'no'[yes]:yes
Attention
:
a). Forking parameters is used to help the platform to send the INVITE request to a number of terminals, and
the device will establish a session with the terminal which return the response
“
200 OK
”
first.
b). Display
IAD(8)#
show forking
Is forking INVITE supported:YES
Is forking preference supported:NO
1xx timeout:180000s
ACK timeout:32000s
5.1.8
SNMP parameters
5.1.8.1
SNMP Web Manage Station Parameters
a). Configuration
IAD(8)#
set snmp
->Enable register SNMP server'yes'or'no'[no]:yes
->SNMP server address[138.0.0.102]:138.0.0.221