MG6000 Series Media Gateway User
’
s Manual
- 11 -
Fig.2-14 MG6008 ET front panel
The front panel indicator shows the working state of A-type MG6008(the front panel layout of type ET is
the same with type A except the color, the color of type ET is blue), including POTS interface of 8 FXS POTS
and the work state of power.
a) RUN: Working status indicator, green. Blinking when it
’
s being supply with power. Being on or off means
the device is not working properly;
b) PWR: power supply indicator, green.
Light is on when the device is being supply with power;
c) U1 ~ U8: NO.1 to 8 user interface working indicator, green. Being on when pick up the phone, being off
when hang up the phone;
2.3.3
Device back panel
The back panel of each type of MG6008 is different, shown as follows:
Fig.2-15 MG6008 back panel
Fig.2-15 shows MG6008 back panel.
a) Power button: power up the device when press the switch, or power down;
b) Power socket: 2.1mm small AC outlet, +12V DC power supply;
c) Phone: POTS port of 4 lines FXS or FXO, RJ-11,after choosing FXS and FXO interface ,the
configuration will be fixed when leave factory;
d) RS232 interface: interface type RJ-11, used for setting data;
e) 10/100Base-T: two 10/100Base-T Ethernet ports, supporting auto-negotiation. The port type is RJ-45.
2-layer string speed switch function lies in the two ports;
Power button
Power socket
