MG6000 Series Media Gateway User
’
s Manual
- 13 -
c) LNK1 and LINK2: No. 1 and No.2 Ethernet connect / data receiving indicator, green. Being on when the
connecting is normal, or off, flashing when receiving data;
d) LNK3: No. 3 Ethernet connecting indicator, green. Being on when the connecting is normal, or off.
e) SPD1 and SPD2: No. 1 and No.2 Ethernet connecting rate indicator, green. Being on when the rate is
100M,being off when the rate is 10M;
f) RX3: No. 3 Ethernet data receiving indicator, green, flashing when receiving data;.
g) U1 ~ U16: NO.1 to 16 user interface working indicator, green. FXS port: being on when ring or pick up the
phone; FXO port: being on when ring or pick up, being off when hang up or cathodely pick off the phone;
2.4.3
Device back panel
Fig.2-20 MG6016 back panel
Fig.2-20 shows MG6016 back panel, the introduction of interfaces is from left to right:
a) Power socket: 220V IDC power supply;
b) Power button: put the'1 ' button down means opening ~ 220 V AC power; to'0' means shutting down ~ 220 V
AC power;
c) Phone: POTS port of 16 lines FXS and FXO, RJ-45. For MG6016-S,users could choose FXS and FXO
interface ,the configuration will be fixed when leave factory; for MG6016-E, Phone interface is FXS;
d) 10/100Base-T: two 10/100Base-T Ethernet ports, supporting auto-negotiation. The port type is RJ-45.
2-layer string speed switch function lies in the two ports;
e) 10Base-T: one 10Base-T Ethernet ports, the port type is RJ-45,used for billing.
f)
RS232 interface: interface type RJ-11, used for setting data and billing;
g) For MG6016-E,providing an escape mouth(the NO.1 RS232) the device will transferred to PSTN
automatically when power off.
2.5
MG6032 introduction
MG6008 is a multiboard structure, the maximum capacity is 32 lines. The user interface (FXS or FXO) could be
FXS
32 or 16FXS
+
16FXO; MG6032 also has 4 10/100Base-T Ethernet ports, supporting auto-negotiation and 2-layer
string speed switch function which could save hubs (switch) for users.
2.5.1 Appearance