MG6000 Series Media Gateway User
’
s Manual
- 53 -
Fig. 4-21 Backup the configuration
Attention
:
Start TFTP server and select the directory on the PC before TFTP operation. TFTP server
could be found in accessory CD; before backup the configuration file, you should specify the IP
address of TFTP server and the backup file name in the web page (fig. 4-20). The backup file is binary.
Please do not modify it.
f). Load configuration over TFTP (PC -> IAD): load the configuration file from PC to IAD. The file can be
created by the operation
“
Backup configuration over TFTP
”
.
Attention: user must start the TFTP server on the PC, and configure its parameters.
g). TFTP Software upgrade: Update the software of device over TFTP.
Attention: Please start the TFTP server on the PC, and configure its parameters.
h). Backup dsp driver file(IAD -> PC). The DSP kernel could be backup in PC before replacing;
Attention: Please start the TFTP server on the PC, and configure its parameters.
i). DSP driver upgrade(PC -> IAD). The series products support G.723.1 and G.729 through replacing the
DSP kernel;
Attention: Please start the TFTP server, and configure the parameters.
j). HTTP Download (PC -> IAD): The IAD download the file which may be application software, binary
config file, text config file, kernel file or DSP kernel file from pc through HTTP. User should specify
the IP address of HTTP server, port number, type of the file, and the file name, shown as Fig.4-22