MG6000 Series Media Gateway User
’
s Manual
- 86 -
Usage:
Command usage:
tftp
host
{
get
|
put
} {
system
|
config
|
dsp
}
filename
Host: tftp server name or IP address
Get: download files from tftp server and write to flash
Put: read data from flash and save to tftp server.
System: system files
Config: config files
Dsp: compress chipset driver files
Filename: the file name needed to update or export
purpose
：
updata the system, configuration file phone, telephone book, and the DSP kernel on line.
For example
：
MG6008# tftp 138.0.0.53 get sys mg6008.bin
Attention
：
the command that is
“
tftp host
put
sys
filename
”
is forbidden.
l
operation
a). User should open a TFTP server in the workstation, and configure the parameters.
b). Make sure the workstation and the IAD
’
s network connect well, and ping each other to check it.
c). User needs to specify the TFTP server address, operational file name (system file, configuration file,
telephone book, DSP kernel).
5.1.14.6
HTTP command
5.1.14.6.1
HTTP parameters configuration
a). configuration
IAD(8)#
set httpdownload-config
->The address of downloading server[138.0.0.137]:138.0.0.22
->The port of downloading server(0-65535)[80]:
Download file type:
1 --- Application software
2 --- Binary config file
3 --- Text config file
4 --- Kernel file
5 --- DSP kernel file
->Select Update file type(1-5)[1]:1
->The config file name[0006040a0b02.cfg]:sip6008etv385.img
Really want to modify ?'yes'or'no'[yes]:yes
b). Display
IAD(8)#
show httpdownload-config
The address of downloading server:138.0.0.22
The port of downloading server:80
Download file type:Application software
