MG6000 Series Media Gateway User
’
s Manual
- 67 -
->Really want to modify?'yes'or'no'[yes]:yes
Attention
:
a).One or both of the two parameters(register server address and hostname of register server) is needed. They
cannot be NULL together, enter 0 to clear them. The suggested value of the Register server port is 5060. The
register interval is the time interval of the device register to the server.
b). Proxy server just like a gateway, if there is not a proxy, it can be cleared.
c). SIP protocol parameters will take effect after saving and reseting.
b). Display
IAD(8)#
show sip
Enable register server:YES
Register server address:138.0.0.221
Hostname of register server:
Register server port:5060
Register interval:300 s
Enable backup register server:NO
Local chat over register server:NO
SIP local udp port:5060
Enable proxy server:NO
5.1.7.2
SIP advanced parameters
a). Configuration
IAD(8)#
set sipadvanced
->Config all timer with default value?'yes'or'no'[yes]:yes
->Keep alive NAT?'yes'or'no'[no]no
->Register-interval update auto?'yes'or'no'[yes]yes
->Support PRACK?'yes'or'no'[yes]:no
->Support TIMER?'yes'or'no'[no]:
->Reject unsupported extension?'yes'or'no'[no]:
->Use customized parameter in SIP URI coding?'yes'or'no'[no]:
->Enable global number support?'yes'or'no'[no]:
->NO audio when start faxing?'yes'or'no'[no]:
->Use c=0.0.0.0(RFC 2543) in SDP when callhold?'yes'or'no'[no]:
->Use c=0.0.0.0(RFC 2543) in SDP when callhold?'yes'or'no'[no]:
->Register with Full information ?'yes'or'no'[yes]:yes
->Support next nonce ?'yes'or'no'[no]:no
->Support Service-route ?'yes'or'no'[no]:
->Support auth info with first reg request ?'yes'or'no'[no]:
->Support 3GPP header?'yes'or'no'[no]:
->Support Reg-subscribe ?'yes'or'no'[no]:
Privacy type:
0 -- Disabled