G&D VisionXS-IP-F-DP-UHR, Инструкция по установке и эксплуатации

Страница: 201 / 232

Configuration
G&D VisionXS-IP-F-DP-UHR · 80
English
Freeze mode
If the cable between the computer module and the console module is disconnected
during operation, the KVM extender will not display an image on the remote con-
sole.
Enable the
Freeze
mode if you want the last image that has been displayed at the con-
sole module to be available until the connection is re-established.
To highlight an interrupted connection, the last available image can be displayed
with either a coloured frame and/or a
Frozen
popup and the time passed since the
connection has been interrupted.
How to configure the Freeze mode:
OSD
1. Press Ctrl+Num ( default ) to open the OSD.
2. Select the row Console setup and press Enter .
3. Under Freeze mode press F8 to select one of the following options:
off  Freeze mode is disabled ( default )
on  Freeze mode is enabled
4. If the Freeze mode is active, press F8 to select one of the options available
under Freeze visualization :
frame  shows a coloured frame when disconnected
OSD  shows Frozen and the time passed since disconnection
frame+OSD  shows a coloured frame ( frame ) and Frozen ( OSD )
5. Press F2 to save your settings.