G&D VisionXS-IP-F-DP-UHR, Инструкция по установке и эксплуатации

Страница: 150 / 232

Establishing a KVM-over-IP™ connection for the first time
29 · G&D VisionXS-IP-F-DP-UHR
Configuring the network interface
How to configure the network interface:
1. Use the remote hotkey Ctrl + Num to open the OSD.
2. Select the entry Network setup and press Enter .
3. Select the entry Interfaces and press Enter .
4. Enter the following data under Interface A :
5. Press F2 to save your settings.
Configuring the global network settings
Even in complex networks global network settings ensure that the KVM extender is
available from all partial networks.
How to configure global network settings:
1. Use the remote hotkey Ctrl + Num to open the OSD of computer module.
2. Select the entry Network setup and press Enter .
3. Select the entry Interfaces and press Enter .
Operational
mode:
Press F8 to select the operational mode of the interface:

Static: A static IP address is assigned.

DHCP: IP address is obtained from a DHCP server.

Off: switches off network interface.
IP address:
Enter the IP address of the interface.
The operational mode DHCP does not allow making entries.
Netmask: Enter the netmask of the network.
The operational mode DHCP does not allow making entries.