G&D VisionXS-IP-F-DP-UHR, Инструкция по установке и эксплуатации

Страница: 143 / 232

Initial configuration of the network settings
G&D VisionXS-IP-F-DP-UHR · 22
English
Configuring global network settings
Even in complex networks global network settings ensure that the KVM extender is
available from all partial networks.
How to configure global network settings:
1. Use the local hotkey ( default : Alt + Num ) to open the local OSD to configure the net-
work interface of the console module or use the remote hotkey ( default : Ctrl + Num ) to
open the remote OSD to configure the network interface of the computer module .
2. Select the entry Network setup and press Enter .
3. Select the entry Interfaces and press Enter .
4. Enter the following data under Main Network :
5. Press F2 to save your settings.
Global
preferences:
Press
F8
to select the global preferences:

Static: uses static settings.

DHCP:
obtains settings from a DHCP server.
Hostname: Enter the device hostname.
Domain: Enter the domain the device is to belong to.
Gateway: Enter the gateway IP address.
DNS Server 1: Enter the IP address of the DNS server.
DNS Server 2: Optionally, enter the IP address of another DNS server.