G&D VisionXS-IP-F-DP-UHR, Инструкция по установке и эксплуатации

Страница: 134 / 232

Installation
13 · G&D VisionXS-IP-F-DP-UHR
Installing console modules
The remote console is connected to the VisionXS-IP-CON console module. The com-
puter connected to the computer module can be operated from this console.
Establishing a connection to a local management network
Network:
Insert a category 5 twisted pair cable (or better), which is available as acces-
sory. Connect the other end of the cable to the local network.
NOTE:
All device variants of the VisionXS-IP series can be operated with an external
power supply at the Power interface (for DT variants: Main Power ).
The illustrations in this chapter show the DT variant of the device series. This
variant is additionally equipped with an internal power supply ( Red. Power ).
NOTE: If desired, connect this network interface to a local network. This enables
you to access the
Config Panel
web application from this network and to send sys-
log messages to this network.
Pwr Main Power Red. Power Network Service Transmission 2 Transmission 1 Pwr Main Power Red. Power Service Transmission 2 Transmission 1