G&D VisionXS-IP-F-DP-UHR, Инструкция по установке и эксплуатации

Страница: 132 / 232

Installation
11 · G&D VisionXS-IP-F-DP-UHR
Establishing a connection to the Gigabit Ethernet
Transmission 1|Tx:
Insert the LC plug of a fibre optic cable, which is available as
accessory, into this interface. Connect the other end to the Gigabit Ethernet.
Transmission 1|Rx: Insert the LC plug of a fibre optic cable, which is available as
accessory, into this interface. Connect the other end to the Gigabit Ethernet.
IMPORTANT: The devices use components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE: Remove the protection caps from the Transmission interfaces and from the
cable plug.
NOTE: The activation of the
Transm. Redundancy
feature activates the
Transmission 2
interface.
To use the
Transmission 2
interface, you need an additional SFP transceiver.
Choose the right
SFP transceiver
for your variant of the
VisionXS-IP-F-DP-UHR
series.
The
Transm. Redundancy options
contain both, a corresponding
SFP transceiver
and the
Transm. Redundancy feature
.
Use this interface to establish a redundant
transmission
connection (
link aggregation
)
with the Gigabit network.
Transmission 1 Service Pwr Main Power Transmission 2 Red. Power Network Service Pwr Main Power Transmission 2 Red. Power Network