G&D VisionXS-IP-F-DP-UHR, Инструкция по установке и эксплуатации

Страница: 137 / 232

Installation
G&D VisionXS-IP-F-DP-UHR · 16
English
Establishing a connection to the Gigabit Ethernet
Transmission 1|Tx: Insert the LC plug of a fibre optic cable, which is available as
accessory, into this interface. Connect the other end to the Gigabit Ethernet.
Transmission 1|Rx: Insert the LC plug of a fibre optic cable, which is available as
accessory, into this interface. Connect the other end to the Gigabit Ethernet.
IMPORTANT: The device uses components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE:
Remove the protection caps from the Transmission interfaces and the cable
plugs.
NOTE: The activation of the Transm. Redundancy feature activates the Transmission 2
interface.
To use the
Transmission 2 interface, you need an additional SFP transceiver.
Choose the right SFP transceiver for your variant of the VisionXS-IP-F-DP-UHR series.
The Transm. Redundancy options contain both, a corresponding SFP transceiver and the
Transm. Redundancy feature .
Use this interface to establish a redundant transmission connection ( link aggregation )
with the Gigabit network.
Transmission 1 Service Pwr Main Power Transmission 2 Red. Power Network Service Pwr Main Power Transmission 2 Red. Power Network