![GalileoSky GLONASS/GPS Satellite v4.0 Скачать руководство пользователя страница 82](http://html1.mh-extra.com/html/galileosky/glonass-gps-satellite-v4-0/glonass-gps-satellite-v4-0_user-manual_3268250082.webp)
GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd.
Page 82
Bit number
Field explanation
0
0 – vibration level corresponds to parking;
1 – to driving (set by AccSens command).
1
0 – incline angle does not exceed the allowable one;
1 – incline level exceeds the allowable one.
2
0 – None of the trusted iButton keys are connected,
1- one of the recorded to the microSD-card iButton keys is connected.
3
0 – there is a SIM card,
1 – GSM modem can’t determine the SIM-card.
4
0 – terminal is outside the geofence,
1 - terminal is inside the geofence.
5
0 – voltage of internal source is normal;
1 – lower than 3.7 V.
6
0 – GPS aerial is connected; 1 – disconnected.
7
0 – voltage of internal Terminal bus supply is normal,
1 – declined from normal.
8
0 – external supply voltage is normal,
1 - declined from normal (set by powincfg command).
9
0 – vehicle is stopped;
1 – vehicle is started (set by mhours command).
10
0 – vibration level corresponds to the normal movement,
1 – vibration level corresponds to a strike.
11
0 – GPS operates;
1 – GLONASS unit operates.
12
Signal quality, range: [0-3]. The less value, the worse communication.
13
14
0 – signaling mode is off;
1 – on.
15
0 – no alarm;
1 – alarm activated.
Table 3. Device status field explanation
Example1.
The Terminal should be configured so that the head pack (HeadPack) contains information about the
Terminal version (HardVersion), firmware version (SoftVersion), unique 15-digit GSM unit identifier( IMEI),
Terminal user ID (ID device).
Correspondent tag mask: 00000000000000000000000000000001111.
To apply the settings we should use the following command
HeadPack 00000000000000000000000000000001111, or omitting zeros, HeadPack 1111
Example2.
It is necessary to configure the main packet (sent in normal mode) so that the Terminal user ID (ID device),
packet number (NumberOfPacket), date and time of packet record (TimeDate), coordinates are sent.
Correspondent tag mask: 00000000000000000000000000001111000
To apply the settings we should use the command: MainPack 1111000.
In this case, we have been omitted the zeros at once.