GalileoSky GLONASS/GPS Satellite v4.0, Руководство пользователя

Страница: 65 / 84

GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd. Page 65
10.8 Voice communication settings
Command format
GSMVolume k,m
Parameters k – GSM-channel sound gain [1÷100].
m – GSM-channel microphone gain [1÷15].
The greater the parameter, the greater the gain.
Explanation Allows speakerphone sound gain parameters being customized.
Example
Request: GSMVolume 75,15
Reply: GSMVOLUME=75,15
Command format
AutoAnswer n
Parameters n – the number of calls before autoanswer. [0÷10]
If the parameter is equal to 0, the function is off.
Explanation Incoming call results in a terminal automatic answer.
Example
Request: AutoAnswer 1
Reply: AUTOANSWER=1
Command format
Calls N
Parameters N – the number of call attempts
Example
Request: Calls 3
Reply: CALLS:3;
Command format
RingTo N
Parameters N – a telephone number
Explanation Making a call from the Terminal to the given telephone number.
Example
Request: RingTo 89119988899
Reply: RINGTO=89119988899
Command format
SendSMS Tel,Msg
Parameters Tel – a telephone number to which SMS is sent
Msg – SMS template. It may contain parameters to insert current data:
%IMEI – terminal`s IMEI, %LAT – latitude, %LON – longitude.
Explanation Sending SMS to the given telephone number.
Example
Request: SendSMS 89119988899,Test
Reply: SMS sheduled
10.9 Analog-discrete inputs setting
Command format InCfg_num_in ft,fl,up_low,up_hi,down_low,down_hi,imp_null
Parameters num_in – an input number, beginning from 0;
ft – filter type
0 – mean value computation;
1 – pulse count;
2 – frequency count
3 – pulse count from two synchronously connected sensors.
fl – filter length [1÷50]. It is used for average and discrete signal function;
up_low – lower limit of a discrete signal triggering, [mV];
up_hi – upper limit of a discrete signal triggering, [mV];
down_low – lower limit of a discrete signal failure, [mV];
down_hi – upper limit of a discrete signal failure, [mV];
imp_null – pulses counter behavior: 1 – counter is set to zero, 0 – counter
continues operation.
Explanation Allows one of 8 analog/discrete inputs being configured.