GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd.
Page 54
Command format
OPS02 n16,n17,n18,n19,n20,n21,n22,n23,n24,n25,n26,n27,n28,n29,n30
Parameters
n16-n30
– preferred GSM-networks.
Explanation
Additional list of preferred GSM-networks for SIM0.
Example
Request: OPS02 25001,25099
Reply: OPS02:25001,25099,,,,,,,,,,,,,;
Command format
OPS1 n1,n2,n3,n4,n5,n6,n7,n8,n9,n10,n11,n12,n13,n14,n15
Parameters
n1-n15
– preferred GSM-networks.
Explanation
A list of preferred GSM-networks for SIM1.
Example
Request: OPS1 25001,25099
Reply: OPS1:25001,25099,,,,,,,,,,,,,;
Command format
OPS12 n16,n17,n18,n19,n20,n21,n22,n23,n24,n25,n26,n27,n28,n29,n30
Parameters
n16-n30
– preferred GSM-networks.
Explanation
Additional list of preferred GSM-networks for SIM1.
Example
Request: OPS12 25001,25099
Reply: OPS12:25001,25099,,,,,,,,,,,,,;
Command format
SIMSwitch mode
Parameters
mode
– SIM switching algorithm:
0 – only SIM 0 is used
1 – cyclic switching between the SIM-cards, if you cannot send the data for 9
minutes
2 – switching to the list of preferred GSM-networks.
Explanation
Setting of an algorithm of switching between the SIM-cards.
Example
Request: SIMSwitch 1
Reply: SIMSwitch:1;
Command format
Serverip host,port
Parameters
host
– domain name of a server or its IP-address;
port
– server port.
Explanation
Main server parameters where the monitoring data will be transmitted to.
Example
Request: Serverip m.7gis.ru,60521
Reply: SERVERIP=m.7gis.ru:60521
Request: Serverip 46.146.233.216,60521
Reply: SERVERIP=46.146.233.216:60521
Command format
Serverip2 ip1,ip2,ip3,ip4,port
Parameters
host
–domain name of a server or its IP-address;
port
– server port.
Explanation
Additional server parameters.
Example
Request: Serverip2 m.7gis.ru,60521
Reply: Serverip2= m.7gis.ru: 60521
Command format
ServersCfg t
Parameters
t
– Time of connection with one server, [sec]. When the value is equal to 0, the
data will only be transmitted to the main server.
Explanation
Sets the time of server connection session.
Example
Request: ServersCfg 120
Reply SERVERSCFG:SeansTime=120;
Command format
ID n
Parameters
n
- terminal number
Explanation
Changes terminal number.
