GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd.
Page 67
10.11
Autoinformer setting
Command format
Autoinformer OnOff,Repeat,Out,FileName
Parameters
OnOff
– enable/disable Autoinformer function: 1 – the function is enabled, 0 –
the black box function is enabled (the navigation data are duplicated and saved to
the external micro-SD card).
Repeat
– determines whether the file should be replayed when the device is in
the playback zone. If the value is 0, the file is played only once on entering the
zone.
FileName
– a route name. The route is understood as the number of zones to be
announced.
Explanation
For more information see section Autoinformer.
Example
Request: Autoinformer 1,0,0,Marshrut 1
Reply: AUTOINFORMER:OnOff=1,Repeat=0,Out=0,Rout=Marshrut 1;.
10.12
Digital inputs settings
Command format
RS485FN nf
Parameters
nf
– function number:
0
–
fuel level sensors , GalileoSky photo camera (of old design);ДБГ-С11Д
dosimeter
1
– RFID reader MATRIX 5;
2 -
fuel level sensors , GalileoSky photo camera (current series tool);ДБГ-С11Д
dosimeter.
Explanation
RS485 port settings.
Example
Request: RS485FN 1
Reply: RS485FN: 1;
Command format
iButtons ib1,ib2,ib3,ib4,ib5,ib6,ib7,ib8
Parameters
ib1-ib8
– four lower bytes of iButton identification hexadecimal number without the
checksum.
For example, full key hexadecimal number:
09 00 00 00 91 02 0С 5С, where
09 – type of device (in this case, it is DS1982, for DS1990 - 01),
00 00 00 91 02 0С – unique number,
5С – the checksum.
In this case, 00 91 02 2С must be entered.
Explanation
List of iButton identifiers, the connection state of which is monitored by the
terminal.
Example
Request: iButtons 0091022C,0,0,0,0,0,0,0
Reply: IBUTTONS:0091022C,0,0,0,0,0,0,0;
Command format
AddKey key
1,…,key25
Parameters
key
– the lower 4 bytes of the iButton identification number excluding the checksum
in hexadecimal form.
For example, the full key number in hexadecimal form is:
09 00 00 00 91 02 0С 5С, where
09 – the type of device (in this case, it is DS1982, for DS1990 - 01),
00 00 00 91 02 0С – the unique number,
5С – the checksum.
In this case, the number to be entered is 00 91 02 2С.
The command can contain a list of up to 25 keys.
Explanation
To add a key to the list of trusted iButton identifiers on a micro-SD-card.
