GalileoSky GLONASS/GPS Satellite v4.0, Руководство пользователя

Страница: 72 / 84

GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd. Page 72
Command format SOUT0 EMode,EImpT,EImpC,DMode,DImpT,DImpC,AMode,AImpT,AImpC,ADelay
Parameters EMode – output operating mode by arming:

0 – no reaction,

1 – output is inverted,

2 – output generates pulses,
EImpT – pulse time during Arming, msec.
EImpC – number of pulses during Arming.
DMode – output operating mode by Disarming:

0 – no reaction;

1 – output is inverted;

2 – output generates pulses.
DImpT – pulse time during Disarming, msec.
DImpC – number of pulses during Disarming
AMode – output mode by Alarm:

0 – no reaction;

1 – output is inverted;

2 – output generates pulses.
AImpT – impulse time during Alarm, msec
AImpC – number of impulses during Alarm.
ADelay – activation delay after Alarm mode is on, in sec.
The Device rounds off pulse duration to 0.1 sec
Explanation Setting the behavior of an output in signaling mode.
Example Request: SOUT0 2,1,1,2,2,2,1,0,0,20
Reply:
SOUT0:EMode=2,EImpT=1,EImpC=1,DMode=2,DImpT=2,DImpC=2,AMode=1,
AImpT=0,AImpC=0, ADelay=20;
sout1, sout2, sout3 commands are similar to sout0.