GALILEOSKY GLONASS/GPS Satellite v4.0 (0223) User’s manual
GalileoSky Ltd.
Page 14
7.2
Determination of strike and incline
All devices can determine the Terminal strike and incline.
Accelerometer axis directions:
Y
Z
To determine strike:
1.
Install the Terminal so as one of the accelerometer axis looks vertically, it will exclude false
detections on road bumps;
2.
Turn on
strike
and incline determination by SHOCK command (section Track parameters setting).
For example, if Z axis is vertical: SHOCK 3,90,5,1200.
A strike is an acceleration increase in horizontal plane; the correspondent bit is put in the device state field
(Table 3. Explanation of device state field) and strike coordinates are recorded.
To determine incline:
1.
Install the Terminal in vehicle;
2.
By SHOCK command set maximum allowable incline angle and allowable time of this angle
exceeding. For example, a maximum angle is 20º, allowable exceed time is 5 seconds: SHOCK
3,20,5,1200.
On the Terminal homing position change in a vehicle, SHOCK command should be given to adopt the
Terminal to a new position.
7.3
Economical driving "EcoDrive" and determination of the driving style
The Terminal can detect rapid acceleration, braking, harsh turns and strikes on bumps. For correct
operation of this function, the terminal must detect its orientation in space with respect to the vehicle (the
vehicle´s running direction and the direction in respect to the ground). The driving style data are stored
only if dynamic archive is enabled (FLASHARCHIVE 1 command).
The default orientation of the terminal:
Driving direction
Direction to the ground
X
